John Deere Combine Settings for Soybeans
Introduction:
Harvesting is the crucial final stage of a long farming process. Nowadays, this operation makes the best use of equipment due to use of advanced science and technology. Well-planned combine setting achieves the best results. The setting is adapted for different kinds of crops. Making use of John Deere Combine settings Soybeans is the right step to take when we harvest a difficult crop such as soybeans.
Significance of having the proper John Deere Combine settings for Soybeans:
John Deere combine is a set up that has a number of machines working effectively as a single unit. To make things work well, prevent loss and damage of grain the setting of various components must be done properly to improve the overall working. By doing these, we can keep the grain loss to a minimum or acceptable level of about 3%. Care must be taken to ensure that only one adjustment is made in one go.
A Few Tips For John Deere Combine Settings Soybeans:
Experienced farmers know that loss of soybean grain happens in three different ways — at the pre-harvest stage, when in the header and in the combine. Loss of harvest that happens can be checked out by examining the rear of the combine. If all the three areas are set properly, grain loss can be decreased to a great extent.
It is in the header section that 80% of grain loss. This implies that it here that that most attention is to be paid. The height of the header and a cutter bar need to be controlled automatically. The header is kept low and at the ground level. The cutter bar also should be maintained as low as we can. This is more so for a crop like soybeans.
Another aspect of the setting is the combine’s ground speed. The operator of the combine can decide this depending on what is most comfortable for him. It is generally kept low for best effect. In addition, Parts like guards, knives as wells as ledger plates need to be maintained in good condition. Likewise, worn out and damaged parts are to be replaced promptly.
If the soybeans crop is of a shorter variety, a few more adjustments are made in the settings in parts such as reel, cutter bar, and auger. Such proper settings ensure the soybean stems get fed into the feeder in a smooth manner via the platform.
A few key parts that need to function at optimum levels are the straw chopper,rotor, and drive chain of the feeder house. The drum should be in a low position. Another tip is to have the reel speed to go well with the state of the soybean and the ground speed. In addition, the chains and bearings need to be always well lubricated. The whole set up should be serviced periodically as required.
Conclusion:
The John Deere Combine setting Soybeans, when carried out well, helps to harvest soybeans and achieve a high level of efficiency and profitability. The soybeans are difficult crops for harvesting. A wise farmer, who follows the approved guidelines, can look forward to a soybean harvest that is richly rewarding.
